How Much Does Pool Light Repair Cost in Florida?
Pool light repair costs in Florida typically range between $133 and $731, depending on whether the issue is the fixture itself, the transformer, wiring, or the switch/timer controls. Pricing can also vary based on light type (LED vs. older fixtures), access to the junction box or transformer, and whether the job requires full pool light replacement.
Pool Light Repair Cost Ranges (Most Common Repairs)
| Repair Scenario | Typical Cost Range | What You’re Paying For |
|---|---|---|
| Replace pool light gasket or seal | $154–$412 | New gasket, resealing, water intrusion prevention |
| Pool light not working (basic electrical fix) | $206–$515 | GFCI check, wiring inspection, testing |
| Repair loose or damaged pool light wiring | $309–$927 | Conduit inspection, cord repair or replacement |
| Pool light niche repair | $412–$1,236 | Niche reseating, corrosion cleanup, sealing |
| Underwater pool light cord replacement | $618–$1,545 | Pull new cord through conduit, reconnect transformer |
| Pool light replacement (repair not possible) | $927–$2,575+ | New light fixture, installation, testing |
Typical total: $206–$927 for most pool light repairs. Wiring or full replacement: $1,545+ is common.
Cost by Severity (Fast Self-Assessment)
Minor
- What it looks like: light flickers, water in lens, failed gasket
- Expected cost: $154–$412
- Common repair: gasket replacement and resealing
Moderate
- What it looks like: light not working, tripping GFCI
- Expected cost: $309–$927
- Common repair: wiring or conduit repair
Severe
- What it looks like: corroded niche, damaged cord, repeated failures
- Expected cost: $927–$2,575+
- Common repair: cord replacement or full light replacement
Pool Light Repair Cost by Problem Type
| Problem Type | Typical Repair Range | Why It Costs More (or Less) |
|---|---|---|
| Failed gasket or water intrusion | $154–$412 | Simple reseal with minimal labor |
| Electrical or GFCI issue | $206–$618 | Troubleshooting and safety testing |
| Damaged conduit or cord | $618–$1,545 | Labor-intensive cord pulling |
| Corroded or loose light niche | $412–$1,236 | Metal repair and sealing work |
| Non-repairable light fixture | $927–$2,575+ | New light installation |
What Increases Pool Light Repair Cost
- Water intrusion: corrosion increases repair scope
- Cord length: long conduit runs cost more to replace
- Niche damage: metal corrosion requires repair
- Electrical safety: GFCI and transformer issues add testing time
- Older pools: outdated fixtures are harder to repair
When Repair Is Enough vs When Replacement Is Required
Repair is usually enough if:
- The fixture housing is intact
- The issue is limited to gasket or wiring
- The light passes electrical safety testing
Replacement is usually required if:
- The fixture is corroded or leaking repeatedly
- The cord cannot be safely replaced
- The light is obsolete or non-code-compliant
Rule: If water has repeatedly entered the fixture, replacement is safer than repair.
Common Add-Ons During Pool Light Repair
| Add-On | Typical Cost | Best Use |
|---|---|---|
| Upgrade to LED pool light | $309–$1,236 | Lower energy use and longer lifespan |
| Transformer replacement | $206–$824 | Voltage or safety issues |
| Bonding or grounding repair | $206–$618 | Electrical safety compliance |
| Pool draining (if required) | $154–$515 | Severe niche or fixture issues |
What a Pool Light Repair Quote Should Include
- Fixture condition assessment
- Gasket, wiring, or niche scope
- Electrical safety testing included
- Repair vs replacement recommendation
- Warranty on parts and labor
Safety and Code Considerations
Pool light repairs must meet electrical and bonding code requirements. Improper repairs pose shock hazards. Always use a licensed pool or electrical professional for underwater lighting repairs.